Standing Seam Metal Roofs
Standing Seam Metal Roofing
Average Cost (Materials & Labor): $800 to $1,400 per square
Metal Roof pricing varies depending on style, scope of project, and type of metal used. Initially a metal roof will seem expensive, however compared to asphalt shingles over the entire lifespan of the roof system, metal is very cost effective due to its longevity. The lifespan on a metal roof can range from 30 to 50 years or longer if properly installed, while the average life of an asphalt roof is 17 years. Standing seam metal roofing is defined as a concealed fastener metal panel system that features vertical legs and a broad, flat area between the two legs. It's also described as having raised seams, or vertical legs, that rise above the level of the panel's flat area.


Galvalume® Metal Roofs
Galvalume® Metal Roofs
Average Cost (Materials & Labor): $1,000 to $1,500 per square
Galvalume® was invented by Bethlehem Steel in 1972. It is a trademarked name, but many people use it as a generic term to describe a metal roofing product consisting of steel coil coated with a metal alloy. The main difference between galvanizing and Galvalume is that galvalume is a combination of zinc, aluminum, and silicon, while galvanizing is 100% zinc. ... Over time, Galvalume tends to perform better than galvanized steel, especially when exposed to water or other liquids that can speed up the oxidation process.


EDCO Steel Metal Roofing
Average Cost (Materials & Labor): $1,200 to $1,700 per square
EDCO is one of the industry leaders that has been manufacturing quality metal roofing and siding since 1946. They offer a number of steel shingle lines that have a 4-way interlocking system and are rated to withstand winds of upto 160 mph. They also have the highest hail impact resistance rating. All are coated with a special TRINAR® finish for flawless, fade-proof color retention. There is ArrowLine Enhanced Shake & stone coated steel is available in six blended, multi-tone colors offering a natural, weathered look. There is also Generations Metal Shake that offers 9 beautiful multi-tone colors that have a more weathered cedar shake appearance. Finally, there is Infinity Steel Shake, that comes in 7 deep multi-tone colors and boasts a special Whisper Quiet coating that mutes outside noises. Due to superior design quality, EDCO is on the higher end of the price spectrum.


Tilcor Roofing Systems
Tilcor Roofing Systems
Average Cost (Materials & Labor): $550 to $795 per square
The core of Tilcor's product offering is the stone-coated steel roofing systems incorporate cutting-edge Zincalume protective steel, which gives the tiles a significantly longer service life than typical galvanized tiles. Tilcor products provide a more visually pleasing finish and exceptional long term durability. The Tilcor Roofing Systems product range offers exceptional strength and durability in the harshest climates. Watertight and fire and earthquake resistant; their pressed steel roofing tiles can withstand hurricane-force winds.


Decra Roofing
Decra Roofing
Average Cost (Materials & Labor): $550 to $795 per square
Lightweight and non-combustible, DECRA metal roofs make for an exceptional fire-resistant solution. Not only are DECRA products fire resistant—but they also come in stunning designs. DECRA metal roofs can handle anything Mother Nature dishes out, providing superior protection against wind, hail, snow, and fire. Decra makes a number of highly durable and attractive stone coated steel roofs. They are an industry leader, who first pioneered the production of stone coated steel roofing over 50 years ago. All of their products have a unique interlocking design, that can withstand very high winds and adds additional strength to the structure. Defend yourself against Mother Nature and take advantage of a $500 rebate.


CertainTeed Matterhorn®
CertainTeed Matterhorn®
Average Cost (Materials & Labor): $700 to $900 per square
The CertainTeed Matterhorn® brand offers homeowners three hyper-realistic architectural roofing profiles – Tile, Slate and Shake – which replicate the color, shadow, and detail of their traditional counterparts while providing the increased durability of metal engineering. Available in numerous colors, including ENERGY STAR® rated options, Matterhorn compliments virtually any style home and addresses environmental concerns such as wind resistance, solar reflectance, impact resistance, and recyclability.


TAMKO Steel Shingles
TAMKO Steel Shingles
Average Cost (Materials & Labor): $500 to $700 per square
TAMKO Building Products LLC is a leading independent manufacturer of residential roofing shingles crafted with American pride for more than 75 years. MetalWorks® steel shingles pair the latest looks with G-90 steel. Whether it’s the traditional look of slate, the lustrous look of tile or the dramatic look of wood, MetalWorks® shingles are available in a full array of colors, all of which are ENERGY STAR® qualified.